Triple Screw Pumps

    

Series A

 

These pumps are designed for handling Alekton Series A Pump clear viscous liquids and are suitable for differential pressures up to 16 bars.

The pumping elements comprise of a power screw and two idler screws, running in a close fitting insert. The idler screws serve to maintain the closed chambers that pump the liquid.

Each screw is provided with a drum so that axial forces are hydraulically balanced. The shaft seal chamber is connected internally to the inlet and the seal is therefore always subjected to inlet pressure only. The inserts, screws and balancing bushes, together with bearing and seals form a replaceable cartridge that is located inside a casing. 

The pumps can be supplied in a variety of materials of construction and for various mounting arrangements.

Operating Range

Particulars Min. Max.
Temperature -30 °C 130 °C
Viscosity 0.8 cSt 100    000 cSt
Inlet Pressure -0.8 barg 6 barg
Outlet pressure 0 barg 16 barg
Flow-rate 5 L/min 10 000 L/min
     

Series C

 

These pumps are designed for handlingAlekton Series C Pumpclear viscous liquids and are suitable for differential pressures up to 16 bars.

The pumping elements comprise of a power screw and two idler screws, running in a close fitting insert. The idler screws serve to maintain the closed chambers that pump the liquid.

Each screw is provided with a drum so that axial forces are hydraulically balanced. The shaft seal chamber is connected internally to the inlet and the seal is therefore always subjected to inlet pressure only. The inserts, screws and balancing bushes, together with bearing and seals form a replaceable cartridge that is located inside a casing.

Operating Range

Particulars Min. Max.
Temperature

-30 °C

130 °C

Viscosity

0.8 cSt

5000 cSt

Inlet Pressure

-0.8 barg

6 barg

Outlet pressure

0 barg

16 barg

Flow-rate

5 L/min

1300 L/min

     

Series D

 

These pumps are designed for handling Alekton Series D Pumpclear viscous liquids and are suitable for differential pressures up to 64 bars.

The pumping elements comprise of a power screw and two idler screws, running in a close fitting insert. The idler screws serve to maintain the closed chambers that pump the liquid.

Each screw is provided with a drum so that axial forces are hydraulically balanced. The shaft seal chamber is connected internally to the inlet and the seal is therefore always subjected to inlet pressure only. The inserts, screws and balancing bushes, together with bearing and seals form a cartridge that is located inside a casing.

The pumps can be supplied in a variety of materials of construction and for various mounting arrangements.

Operating Range

Particulars Min. Max.
Temperature -30 °C 130 °C
Viscosity 0.8 cSt 100   000 cSt
Inlet Pressure -0.8 barg 6 barg
Outlet pressure 0 barg 64 barg
Flow-rate 5 L/min 1300 L/min